RC 8 Wireless Motion Door Chime ( RX/ TX 1000A )
Rated 3.5/5 based on 11 customer reviews
RC 8 Wireless Motion Door Chime ( RX/ TX 1000A )
Available: In Stock
$109.95
Wishlist Compare

Detects any Motion Infrared Sensor Wireless - Simple Installation Receiver has a volume control and plugs into a wall outlet of the transmitter. Receiver uses 110 Volts and will have up to four volume controlled tones Transmitter is battery powered by 3 "AA"( NOT INCLUDED ) that will last up to one year with transmission distance of up to 500 feet

SHOULD THE CUSTOMER WISH TO HAVE THIS CHIME PROGRAMMED FOR A TURNKEY INSTALLATION PLEASE GO TO THE PROGRAMMED RC 8 HERE

Timer:

Connect to  12 volt relay on back of receiver if additional time is needed .

the timer will have a timed output of 2, 5,10 minutes or indefinitely .

Plug in a lamp or series of lights , or siren or any accessory up to 250 Watts max

Originally this timer was made by Design Tech , then STI .

PLEASE NOTE THE PLUG/ CONNECTOR PICTURED IS CUT OFF TO ACCOMMODATE 12 VOLT RELAYS

Strobe:

his strobe can be used for the hearing impaired as well for use in noisy environments. The amber color is best suited for this purpose. The strobe has a flash rate of 90 flashes per minute. The strobe may be used with any 12 volt relay

SPECS :

  • For "informative" general signaling requirements
  • Incorrect polarity cannot damage circuit or draw current
  • Easy 2-wire installation, regardless of voltage. Also, if the strobe light is being powered by a battery, as the battery is drained the strobe light will continue to function
  • Low current consumption with long operating lifespan of over 300 continuous hours (2,000,000 flashes)
  • Includes choice of amber, blue, clear, or red lens
  • Lens is made of high-impact resistant acrylic, case of high-impact resistant ABS plastic
  • Use in temperature ranging from -22ºF (-30ºC) to 140ºF (60ºC)

 

MINI STROBE/ SIREN :

  • Synchronized piezo siren and LED
  • Mounts to single-gang box or surface-mount
  • High-impact plastic casing
  • Weatherproof for indoor and outdoor use
  • Simple 2-wire connection
  • Alarm siren sound: 110dB@1ft (30cm) at 12VDC
  • Operating voltage: 6~15VDC
  • Current draw: 90mA@12VDC

Strobe with rotating/ flashing LED and 100 DB Siren

Operating life over 50,000 hours (over 5.7 years)
• Simple 2-wire installation
• High-impact resistant case

• High-impact and heat-resistant lens
• Weather resistant

• Reverse polarity protection
• Visible in all directions
• 5 lens colors available Amber, Blue, Green, Red and Clear
• 5 Vertical LED strips (32 LEDs) increase visibility from various directions
• 6 different flashing options
• Adjustable flashing speed

TONE 1

TONE 2

TONE 3

TONE 4

Detects any Motion Infrared Sensor Wireless - Simple Installation Receiver has a volume control and plugs into a wall outlet of the transmitter. Receiver uses 110 Volts and will have up to four volume controlled tones Transmitter is battery powered by 3 "AA"( NOT INCLUDED ) that will last up to one year with transmission distance of up to 500 feet

SHOULD THE CUSTOMER WISH TO HAVE THIS CHIME PROGRAMMED FOR A TURNKEY INSTALLATION PLEASE GO TO THE PROGRAMMED RC 8 HERE

Timer:

Connect to  12 volt relay on back of receiver if additional time is needed .

the timer will have a timed output of 2, 5,10 minutes or indefinitely .

Plug in a lamp or series of lights , or siren or any accessory up to 250 Watts max

Originally this timer was made by Design Tech , then STI .

PLEASE NOTE THE PLUG/ CONNECTOR PICTURED IS CUT OFF TO ACCOMMODATE 12 VOLT RELAYS

Strobe:

his strobe can be used for the hearing impaired as well for use in noisy environments. The amber color is best suited for this purpose. The strobe has a flash rate of 90 flashes per minute. The strobe may be used with any 12 volt relay

SPECS :

  • For "informative" general signaling requirements
  • Incorrect polarity cannot damage circuit or draw current
  • Easy 2-wire installation, regardless of voltage. Also, if the strobe light is being powered by a battery, as the battery is drained the strobe light will continue to function
  • Low current consumption with long operating lifespan of over 300 continuous hours (2,000,000 flashes)
  • Includes choice of amber, blue, clear, or red lens
  • Lens is made of high-impact resistant acrylic, case of high-impact resistant ABS plastic
  • Use in temperature ranging from -22ºF (-30ºC) to 140ºF (60ºC)

 

MINI STROBE/ SIREN :

  • Synchronized piezo siren and LED
  • Mounts to single-gang box or surface-mount
  • High-impact plastic casing
  • Weatherproof for indoor and outdoor use
  • Simple 2-wire connection
  • Alarm siren sound: 110dB@1ft (30cm) at 12VDC
  • Operating voltage: 6~15VDC
  • Current draw: 90mA@12VDC

Strobe with rotating/ flashing LED and 100 DB Siren

Operating life over 50,000 hours (over 5.7 years) • Simple 2-wire installation • High-impact resistant case

• High-impact and heat-resistant lens
• Weather resistant

• Reverse polarity protection • Visible in all directions • 5 lens colors available Amber, Blue, Green, Red and Clear • 5 Vertical LED strips (32 LEDs) increase visibility from various directions • 6 different flashing options • Adjustable flashing speed

TONE 1

TONE 2

TONE 3

TONE 4

SHIPPING Shipping is included in the purchase price of most of our products. Because of this Reliable Chimes,Inc. will determine which method is best when the order is shipped. Should the customer want a different delivery method then the customer will need to make Reliable Chimes, Inc. aware and an additional charge for shipping will be added . Orders will normally ship the same day or the next business day and will be by UPS or the US MAIL unless otherwise specified. Wrong Address Charges In the event any customer provides Reliable Chimes,Inc. an incorrect address there will be a charge issued to that customer for the wrong address for the charge that UPS will charge to Reliable Chimes, Inc.

Customer Reviews

Based on 2 reviews Write a review