About This Product
Detects any Motion Infrared Sensor Wireless - Simple Installation Receiver has a volume control and plugs into a wall outlet of the transmitter. Receiver uses 110 Volts and will have up to four volume controlled tones Transmitter is battery powered by an AC adapter that will eliminate the use of batteries with transmission distance of up to 500 feet.
Tone will be set for double ding dong so that your order shall be ready to install right out of the box
Battery Adapter :
For those that do not want to use or change a battery this is an option
Timer:
Connect to 12 volt relay on back of receiver if additional time is needed .
the timer will have a timed output of 2, 5,10 minutes or indefinitely .
Plug in a lamp or series of lights , or siren or any accessory up to 250 Watts max
Originally this timer was made by Design Tech , then STI .
PLEASE NOTE THE PLUG/ CONNECTOR PICTURED IS CUT OFF TO ACCOMMODATE 12 VOLT RELAYS
Strobe:
This strobe can be used for the hearing impaired as well for use in noisy environments. The amber color is best suited for this purpose. The strobe has a flash rate of 90 flashes per minute. The strobe may be used with any 12 volt relay
SPECS :
- For "informative" general signaling requirements
-
Incorrect polarity cannot damage circuit or
draw current -
Easy 2-wire installation, regardless of voltage. Also, if the strobe light is being powered by a battery, as the battery is drained the strobe light will continue
to function -
Low current consumption with long operating lifespan of over 300 continuous hours
(2,000,000 flashes) -
Includes choice of amber, blue, clear,
or red lens -
Lens is made of high-impact resistant acrylic, case of high-impact resistant
ABS plastic -
Use in temperature ranging from
-22ºF (-30ºC) to 140ºF (60ºC)
MINI STROBE/ SIREN :
- Synchronized piezo siren and LED
- Mounts to single-gang box or surface-mount
- High-impact plastic casing
- Weatherproof for indoor and outdoor use
- Simple 2-wire connection
- Alarm siren sound: 110dB@1ft (30cm) at 12VDC
- Operating voltage: 6~15VDC
- Current draw: 90mA@12VDC
Strobe with rotating/ flashing LED and 100 DB Siren
• High-impact and heat-resistant lens
• Weather resistant
TONE 1
TONE 2
TONE 3
TONE 4